Click to enlarge
Peak Design - Motorcycle Bar Mount RM529.00
Back to products
Peak Design - Car Vent Mount RM349.00 – RM529.00

Peak Design – Car VHB Mount

RM249.00 – RM429.00

A phone mount that is so beautiful, secure, and intuitive, that once you install it in your car, you’ll feel like it was there from the start. That’s because unlike flimsy, bulky plastic car mounts that stick out like sore thumbs, the Peak Design Car Mount is made from a beautiful machined/anodized aluminum and mounts directly to your dash or console via an ultra-durable 3M VHB pad. Ultra-strong MagSafe-compatible magnets hold your phone in place even during the most spirited driving‚ we call the mounting system SlimLink and it’s so fast and secure, it borders on magic. Adjust viewing angle with a buttery-smooth aluminum ballhead. Car Mount’s small footprint lets you mount your phone right where you want it without obstructing your view of the road.

Available in standard or wireless charging models. With the charging model, the mount’s magnetic connection system ensures perfect charging coil alignment every time. That means more consistent and efficient charging, and no more surprise battery outages.

View our Vent Mount for additional mounting options. Requires a Peak Design Case or Universal Adapter (sold separately). Also works with MagSafe phones and phone cases. Charging may not be possible or optimal when using the Universal Adapter. Best results when attached to flat, hard, non-porous, non-textured surfaces.

Clear
Compare
Add to wishlist
SKU: N/A Categories: ,
Description

Specs

Dimensions

  • Charging:

    • Mount Head: 5.8cm x 5.8cm x 1.2cm (2.3″ x 2.3″ x 0.5″)
    • Total Height (from dashboard): 4.5cm (varies depending on ballhead position)
    • Base Pad: 3cm x 5cm (1.9″ x 2.0″)

  • Non-Charging:

    • Mount Head: 5.5cm x 5.5cm x 0.7cm (2.2″ x 2.2″ x 0.3″)
    • Total Height (from dashboard): 3.7cm (varies depending on ballhead position)
    • Base Pad: 3cm x 5cm (1.9″ x 2.0″)

Weight

  • Charging:

    • 95.4g (3.4oz)
      Including charging hardware: 133.5g (4.7oz)

  • Non-Charging:

    • 58g (2.05oz)

Adhesive Removal

  • Can be safely removed without damaging surfaces or leaving residue in most instances
  • Hold dental floss between adhesive pad and dash, and pull floss in a sawing motion to break the adhesive bond
  • If there is remaining residue, roll it off with your finger or remove with blue painter’s tape
  • Includes a 2nd adhesive pad for remounting/repositioning

 

 

Materials & Sustainability

  • Materials (both models)
  • Machined/anodized aluminum mounting head & stem
  • Grippy silicone mounting pad with Tinuvin 770 UV-stabilizer
  • High-temp neodymium mounting magnets

 

 

Design Features

Features Overview

Meet the Peak Design Car Mount. A phone mount that is so beautiful, secure, and intuitive, that once you install it in your car, you’ll feel like it was there since your car rolled off the production line. That’s because unlike flimsy, bulky plastic car mounts that stick out like sore thumbs, the Peak Design Car Mount is made from a beautiful machined/anodized aluminum and mounts directly to your dash or console via an ultra-durable 3M VHB pad. Ultra-strong MagSafe-compatible magnets hold your phone in place even during the most spirited driving‚ we call the mounting system SlimLink and it’s so fast and secure, it borders on magic.

 

Meet Slimlink™

At the heart of the Car Mount is Peak Design’s revolutionary SlimLink™ magnetic attachment system. This built-in technology provides an ultra-secure connection that holds your phone firmly in place, even during the bumpiest of rides. The system is compatible with both Peak Design Cases and MagSafe® phones and cases, allowing for effortless attachment and detachment with just one hand. The instant, reliable connection feels almost magical, making it a joy to use every time you get in the car.

 

Adjustable Ball Head

Peak Design’s Car Mount offers ultra-smooth, stable viewing angle adjustment, allowing you to position your phone exactly where you need it. The mount features a wide range of articulation, with a ball head designed by Peak Design’s tripod engineers, enabling precise control and easy switching between portrait and landscape modes. This flexibility ensures that your phone is always visible and accessible without obstructing your view, making for a safer and more convenient driving experience.

 

Endless Mounting Locations

The Peak Design Car Mount provides endless mounting possibilities within your vehicle. It installs with ultra-strong, weatherproof 3M VHB adhesive, making it compatible with a variety of smooth, flat surfaces on your dashboard or console. While best suited for smooth surfaces, it can be safely removed without leaving damage or residue, thanks to the included extra adhesive pad for repositioning. With its ability to mount securely without blocking your field of view, the Car Mount offers a flexible, clutter-free way to keep your phone in the perfect spot.

 

Gorgeous Minimal Design

Designed to complement your vehicle’s interior, the Car Mount has a low-profile, aesthetically clean look that feels like a natural part of your dashboard. Its sleek form factor and refined details ensure that it blends seamlessly into your car, avoiding the cheap and bulky appearance of traditional mounts. The mount’s understated elegance, paired with its premium materials, makes it a stylish yet functional accessory that elevates your in-car experience.

 

Built to Last

Crafted from beautiful machined and anodized aluminum, the Car Mount is designed to endure the test of time. It’s made with premium materials and robust construction, ensuring it remains reliable through multiple phones and years of use. Like all Peak Design products, this mount is guaranteed for life, reflecting the brand’s commitment to exceptional quality and durability. Whether you’re using it with your first Peak Design setup or your fifth, it will keep delivering peak performance.

 

 

What’s In The Box

  • Car Mount x1
  • Extra Adhesive Pad x1
Additional information
Type

Charging, Non-Charging
Shipping & Delivery

Related products

Compare
Quick view
Add to wishlist

Peak Design – Field Pouch V2

,
RM299.00
Select options
Field Pouch is the organizer that is truly 2 bags in 1: a minimalist carry-all sling bag, and compressible in-bag organizer. A roll-top opening grants easy access, massive expansion (it doubles in volume), and quick compression to eliminate unused space. Inside you’ll find a thoughtful layout of stretch pockets and zip pockets to keep cords, cards, batteries, keys—even small lenses or camera bodies—organized and not jingling around. Included ultralight adjustable strap enables cross-body or shoulder carry, and integrated belt loops allow for waist carry. For a lightweight shooting setup, attach a Capture Clip (sold separately) and keep your camera outside the pouch—keep your rig at-the-ready, and increase storage space for accessories. All fabrics are recycled and Bluesign approved, including the soft internal felt liner and the 400D double poly-coated weatherproof nylon canvas shell. Now in its 2nd generation, the Field Pouch V2 features tons of usability optimizations like an included strap, improved pocket layout, and dual Capture attachment points. Updated patterning integrates loads of functionality into single, sweeping seam lines for a timeless, minimal look.
Compare
Quick view
Add to wishlist

Peak Design – Flathook Carry Strap

,
RM59.00
Add to cart
Flathook Carry Straps for Ultralight Packing Cubes. Dimensions: Max length: 154 cm (60.63 in) Min length: 82 cm (32.28 in)
Compare
Quick view
Add to wishlist

Peak Design – Clutch Camera Strap

,
RM259.00
Add to cart
The world’s first camera hand strap that is quick-connecting and quick-adjusting. Clutch gives you access to your camera’s controls but quickly cinches down when you need security. Hypalon exterior, microfiber pad, and aluminum adjuster hardware is ultra-durable and inspired by high-end climbing gear. Attaches to your camera at 2 points: your camera strap mount (via a reinforced Hypalon loop) and your camera tripod mount (via our low-profile Arca-compatible Standard Plate). Clutch can be used alongside other Peak Design straps, as well as the Capture Camera Clip. Still not sure what strap you need? See our comparison guide.
Compare
Quick view
Add to wishlist

Peak Design – Micro Clutch

,
RM359.00
Select options
The first of its kind, Micro Clutch is a hand strap specifically designed for small mirrorless camera bodies. Micro Clutch is perfectly suited for any activity where drop protection and comfort are of the essence, whether it's run-and-gun street photography, actively shooting in the outdoors, or doing an extended portrait session in the studio. Unlike traditional DSLR hand straps which press your palm against your camera body, Micro Clutch's padded Hypalon loop comfortably cradles 2-4 fingers. This unique design gives you a delightful combination of superior grip and enhanced comfort, and does so without restricting your access to your camera's front, rear, and top controls. A beautiful low-profile machined aluminum baseplate conceals a hidden attachment tool, making battery access a breeze. Micro Clutch also includes a removable tripod plate for use with Capture V3, PD tripods, and 3rd party Arca-compatible tripods. A built-in Anchor attachment point allows use with any PD camera strap. Fits a wide range of mirrorless camera bodies. Choose the L-plate model for mirrorless cameras with a pronounced hand grip, and the I-plate model for cameras with little or no hand grip.
Compare
Quick view
Add to wishlist

Peak Design – Travel Backpack

,
RM1,359.00 – RM1,799.00
Select options
Specs External Dimensions 30L Standard: 53cm x 33cm x 18cm (20.9″ x 13″ x 7″) Expanded: 53cm x 33cm x
Compare
Quick view
Add to wishlist

Peak Design – Everyday Case for iPhone 14 Series

,
RM199.00 – RM249.00
Select options
A Magsafe-compatible phone case with the perfect balance of slimness, smart aesthetics, and protection, plus it brilliantly connects to the entire Peak Design Mobile Ecosystem. It's a case with zero compromise—and you don't have to take our word. The Wirecutter frankly admits "we don't say this often, but there aren't any flaws." Features a slim 2.4mm profile and protective rubberized bumper, all wrapped in beautiful nylon canvas shell. But what truly sets this case apart is the brilliant magnetic/mechanical lock that's built right into it. We call this mounting technology SlimLink™, and it's so fast and secure that it borders on magic. With this case on your phone, you can instantly connect to all Peak Design Mobile mounts, chargers, and accessories. It even works with Apple MagSafe chargers and accessories, however compatibility with all 3rd party chargers is not guaranteed.
Compare
Quick view
Add to wishlist

Peak Design – Out Front Bike Mount

,
RM379.00
Add to cart
Newly updated to work with even more handlebar sizes, the streamlined Out Front Bike Mount lets you rigidly attach your phone to your bike’s handlebars, access it instantly, and even flip it up to film your ride. Built from ultralight machined/anodized aluminum, it features an ultra-strong magnetic/mechanical mounting technology (called SlimLink™) that grabs and locks so effortlessly, it feels like magic. Remove your phone instantly with the press of a button. Designed to hold your phone in front of your handlebars for optimized viewing, it can also be configured to sit below or behind your handlebars to accommodate bike computers. An included thumbscrew lets you reposition your phone on-the-fly to film your ride. And an included accessory mount lets you attach a bike light or action camera. Whether it's a quick commute or a century ride down gravel trails, the Out Front Bike Mount keeps your phone safe and viewable always. Includes sizing collars to attach to the following bar diameters: 22.2mm (7/8"), 25.4mm (1"), 31.8mm (1-1/4"), 35mm. Not compatible with tapered or non-round bars. See this article for more info on bar compatibility. Requires a Peak Design Case or Universal Adapter (sold separately).
Compare
Quick view
Add to wishlist

Peak Design – Universal Adapter

,
RM169.00
Add to cart
Install this adhesive-backed adapter on the back of a 3rd party phone case to make nearly any phone compatible with Peak Design Mobile mounts and accessories. At just 2.5mm thick and wrapped in a beautiful weatherproof nylon canvas, the Universal Adapter is low-profile, aesthetically clean, and adheres with 3M VHB for an ultra-strong, ultra-durable connection. Like the Peak Design Everyday Case, the Universal Adapter has a brilliant magnetic/mechanical lock built right into it. We call this mounting technology SlimLink, and it's so fast and secure that it borders on magic. With this adapter on your 3rd party phone case, you can instantly connect to all Peak Design Mobile mounts and accessories. It even works with Apple MagSafe accessories, too. Adheres to smooth, non-textured, non-porous case materials like hard plastic and metal. Not recommended for soft or rubbery surfaces like silicone or leather. Installing directly on your phone is not recommended. Wireless charging may not be possible or optimal with adapter installed. This adapter contains magnets that may interfere with stylus accessories like the Samsung S-Pen. Not designed for tablets or folding/flip phones.