Click to enlarge
Peak Design - Motorcycle Bar Mount RM529.00
Back to products
Peak Design - Car Vent Mount RM349.00 – RM529.00

Peak Design – Car VHB Mount

RM249.00 – RM429.00

A phone mount that is so beautiful, secure, and intuitive, that once you install it in your car, you’ll feel like it was there from the start. That’s because unlike flimsy, bulky plastic car mounts that stick out like sore thumbs, the Peak Design Car Mount is made from a beautiful machined/anodized aluminum and mounts directly to your dash or console via an ultra-durable 3M VHB pad. Ultra-strong MagSafe-compatible magnets hold your phone in place even during the most spirited driving‚ we call the mounting system SlimLink and it’s so fast and secure, it borders on magic. Adjust viewing angle with a buttery-smooth aluminum ballhead. Car Mount’s small footprint lets you mount your phone right where you want it without obstructing your view of the road.

Available in standard or wireless charging models. With the charging model, the mount’s magnetic connection system ensures perfect charging coil alignment every time. That means more consistent and efficient charging, and no more surprise battery outages.

View our Vent Mount for additional mounting options. Requires a Peak Design Case or Universal Adapter (sold separately). Also works with MagSafe phones and phone cases. Charging may not be possible or optimal when using the Universal Adapter. Best results when attached to flat, hard, non-porous, non-textured surfaces.

Clear
Compare
Add to wishlist
SKU: N/A Categories: ,
Description

Specs

Dimensions

  • Charging:

    • Mount Head: 5.8cm x 5.8cm x 1.2cm (2.3″ x 2.3″ x 0.5″)
    • Total Height (from dashboard): 4.5cm (varies depending on ballhead position)
    • Base Pad: 3cm x 5cm (1.9″ x 2.0″)

  • Non-Charging:

    • Mount Head: 5.5cm x 5.5cm x 0.7cm (2.2″ x 2.2″ x 0.3″)
    • Total Height (from dashboard): 3.7cm (varies depending on ballhead position)
    • Base Pad: 3cm x 5cm (1.9″ x 2.0″)

Weight

  • Charging:

    • 95.4g (3.4oz)
      Including charging hardware: 133.5g (4.7oz)

  • Non-Charging:

    • 58g (2.05oz)

Adhesive Removal

  • Can be safely removed without damaging surfaces or leaving residue in most instances
  • Hold dental floss between adhesive pad and dash, and pull floss in a sawing motion to break the adhesive bond
  • If there is remaining residue, roll it off with your finger or remove with blue painter’s tape
  • Includes a 2nd adhesive pad for remounting/repositioning

 

 

Materials & Sustainability

  • Materials (both models)
  • Machined/anodized aluminum mounting head & stem
  • Grippy silicone mounting pad with Tinuvin 770 UV-stabilizer
  • High-temp neodymium mounting magnets

 

 

Design Features

Features Overview

Meet the Peak Design Car Mount. A phone mount that is so beautiful, secure, and intuitive, that once you install it in your car, you’ll feel like it was there since your car rolled off the production line. That’s because unlike flimsy, bulky plastic car mounts that stick out like sore thumbs, the Peak Design Car Mount is made from a beautiful machined/anodized aluminum and mounts directly to your dash or console via an ultra-durable 3M VHB pad. Ultra-strong MagSafe-compatible magnets hold your phone in place even during the most spirited driving‚ we call the mounting system SlimLink and it’s so fast and secure, it borders on magic.

 

Meet Slimlink™

At the heart of the Car Mount is Peak Design’s revolutionary SlimLink™ magnetic attachment system. This built-in technology provides an ultra-secure connection that holds your phone firmly in place, even during the bumpiest of rides. The system is compatible with both Peak Design Cases and MagSafe® phones and cases, allowing for effortless attachment and detachment with just one hand. The instant, reliable connection feels almost magical, making it a joy to use every time you get in the car.

 

Adjustable Ball Head

Peak Design’s Car Mount offers ultra-smooth, stable viewing angle adjustment, allowing you to position your phone exactly where you need it. The mount features a wide range of articulation, with a ball head designed by Peak Design’s tripod engineers, enabling precise control and easy switching between portrait and landscape modes. This flexibility ensures that your phone is always visible and accessible without obstructing your view, making for a safer and more convenient driving experience.

 

Endless Mounting Locations

The Peak Design Car Mount provides endless mounting possibilities within your vehicle. It installs with ultra-strong, weatherproof 3M VHB adhesive, making it compatible with a variety of smooth, flat surfaces on your dashboard or console. While best suited for smooth surfaces, it can be safely removed without leaving damage or residue, thanks to the included extra adhesive pad for repositioning. With its ability to mount securely without blocking your field of view, the Car Mount offers a flexible, clutter-free way to keep your phone in the perfect spot.

 

Gorgeous Minimal Design

Designed to complement your vehicle’s interior, the Car Mount has a low-profile, aesthetically clean look that feels like a natural part of your dashboard. Its sleek form factor and refined details ensure that it blends seamlessly into your car, avoiding the cheap and bulky appearance of traditional mounts. The mount’s understated elegance, paired with its premium materials, makes it a stylish yet functional accessory that elevates your in-car experience.

 

Built to Last

Crafted from beautiful machined and anodized aluminum, the Car Mount is designed to endure the test of time. It’s made with premium materials and robust construction, ensuring it remains reliable through multiple phones and years of use. Like all Peak Design products, this mount is guaranteed for life, reflecting the brand’s commitment to exceptional quality and durability. Whether you’re using it with your first Peak Design setup or your fifth, it will keep delivering peak performance.

 

 

What’s In The Box

  • Car Mount x1
  • Extra Adhesive Pad x1
Additional information
Type

Charging, Non-Charging
Shipping & Delivery

Related products

Compare
Quick view
Add to wishlist

Peak Design – Shoe Pouch

,
RM159.00
Select options
Strong, ultralight, and ultra-packable, Shoe Pouch (now in 3 colors) provides dedicated storage for shoes or clothes. Works great with any suitcase or bag, and sized to fit perfectly into Peak Design Travel Bags. Uniquely patterned from a single piece of self-healing 70D nylon, the Shoe Pouch weighs in at a feathery 48g. When you’re not using Shoe Pouch, stow it in the integrated storage pouch. A perfect little bag to have on-hand in case you need more storage or organization mid-trip. The burly #5 UltraZip on the main opening can withstand decades of use thanks to it's proprietary abrasion-resistant thread. Typically fits 1-2 pairs of shoes, depending on size. Fair Trade Certified and 100% carbon neutral. Fabric is solution-dyed for significant reduction in water use, and Raw color way is undyed for even greater water/energy savings. Designed for use in any suitcase or bag, and sized to fit perfectly in any Peak Design Travel Bag. Bundle with our Packing Cubes and save 10%.
Compare
Quick view
Add to wishlist

Peak Design – Cuff Camera Strap

,
RM219.00
Select options
The most elegant, unobtrusive way to protect your camera from accidental drops, Cuff camera wrist strap is total peace of mind in a tiny, low-profile package. Quickly and securely connect Cuff to any camera, binoculars, or other device using our unique Anchor Link system. Each Anchor holds over 200lbs (90kg), strong enough to keep the heaviest of pro rigs safe. Cuff’s wrist loop locks in the open position, or comfortably cinches down on your wrist for added security. When not in use, keep Cuff in your pocket or wrap it around your wrist and keep it there. An adjustable magnet holds the loose end of Cuff, so it’s right there when you need it. As of 2018, Cuff features upgraded webbing and totally revamped adjustment hardware. Anchor connectors have been updated to be smaller, faster, and more secure.
Compare
Quick view
Add to wishlist

Peak Design – Micro Clutch

,
RM359.00
Select options
The first of its kind, Micro Clutch is a hand strap specifically designed for small mirrorless camera bodies. Micro Clutch is perfectly suited for any activity where drop protection and comfort are of the essence, whether it's run-and-gun street photography, actively shooting in the outdoors, or doing an extended portrait session in the studio. Unlike traditional DSLR hand straps which press your palm against your camera body, Micro Clutch's padded Hypalon loop comfortably cradles 2-4 fingers. This unique design gives you a delightful combination of superior grip and enhanced comfort, and does so without restricting your access to your camera's front, rear, and top controls. A beautiful low-profile machined aluminum baseplate conceals a hidden attachment tool, making battery access a breeze. Micro Clutch also includes a removable tripod plate for use with Capture V3, PD tripods, and 3rd party Arca-compatible tripods. A built-in Anchor attachment point allows use with any PD camera strap. Fits a wide range of mirrorless camera bodies. Choose the L-plate model for mirrorless cameras with a pronounced hand grip, and the I-plate model for cameras with little or no hand grip.
Compare
Quick view
Add to wishlist

Peak Design – Everyday Case for iPhone 13 Series

,
RM199.00 – RM249.00
Select options
A Magsafe-compatible phone case with the perfect balance of slimness, smart aesthetics, and protection, plus it brilliantly connects to the entire Peak Design Mobile Ecosystem. It's a case with zero compromise—and you don't have to take our word. The Wirecutter frankly admits "we don't say this often, but there aren't any flaws." Features a slim 2.4mm profile and protective rubberized bumper, all wrapped in beautiful nylon canvas shell. But what truly sets this case apart is the brilliant magnetic/mechanical lock that's built right into it. We call this mounting technology SlimLink™, and it's so fast and secure that it borders on magic. With this case on your phone, you can instantly connect to all Peak Design Mobile mounts, chargers, and accessories. It even works with Apple MagSafe chargers and accessories, however compatibility with all 3rd party chargers is not guaranteed.
Compare
Quick view
Add to wishlist

Peak Design – Everyday Case for Iphone 15 Series

,
RM249.00 – RM299.00
Select options
A Magsafe-compatible phone case with the perfect balance of slimness, smart aesthetics, and protection, plus it brilliantly connects to the entire Peak Design Mobile Ecosystem. It's a case with zero compromise—and you don't have to take our word. The Wirecutter frankly admits "we don't say this often, but there aren't any flaws." Features a slim 2.4mm profile and protective rubberized bumper, all wrapped in beautiful nylon canvas shell. But what truly sets this case apart is the brilliant magnetic/mechanical lock that's built right into it. We call this mounting technology SlimLink™, and it's so fast and secure that it borders on magic. With this case on your phone, you can instantly connect to all Peak Design Mobile mounts, chargers, and accessories. It even works with Apple MagSafe chargers and accessories, however compatibility with all 3rd party chargers is not guaranteed.
Compare
Quick view
Add to wishlist

Peak Design – Ball Mount Adapter

,
RM269.00 – RM459.00
Select options
Ideal for motorcycles, cars, trucks, ATVs, overlanding vehicles, boats, planes, and wheelchairs, these adapters let you upgrade your 3rd party phone mount with Peak Design's strong, low-profile, easy-to-use SlimLink™ connection system. It works with a variety of modular 3rd party phone mounting systems—specifically ones that utilize either 1" or 20mm diameter ball-and-socket joints. These 3rd party systems enable an almost infinite range of mounting phone configurations. The Peak Design Ball Mount Adapters upgrade your system with brilliantly fast and secure mounting action for your phone. They also feature weatherproof machined and anodized aluminum construction, ideal for the Locking Ball Mount and all of the outdoor adventures you will go on. Choose from 2 mount styles, locking or charging. Locking mounts are more secure, featuring push-button phone release, and are suited for outdoor use (motorcycles, dirtbikes, ATVs, boats). Locking mounts feature a best-in-class vibration isolator to prevent phone damage. Charging mounts hold your phone magnetically and provide instant wireless charging. They're suitable for any vehicle with a closed cabin (cars, trucks, planes) and can still handle the gnarliest off-road trails. Charging mounts are also MagSafe compatible. Requires a 3rd party phone mount that utilizes 1" (like RAM) or 20mm (like Offroam, Tackform, 67 Designs) ball-and-socket connection joints (sold separately). Locking mounts require a Peak Design Case or Universal Adapter (sold separately).
Compare
Quick view
Add to wishlist

Peak Design – Motorcycle Stem Mount

,
RM529.00
Add to cart
Ideal for sport and street bikes with clip-on style handlebars, the low-profile Motorcycle Stem Mount‚ now with optional Qi2 wireless charging‚ keeps your phone rigidly mounted, easily viewable, and instantly accessible. Securely installs in most hollow-center steering stem nuts using an expansion plug. Features an ultra-strong magnetic/mechanical mounting technology (called SlimLink) that grabs, locks, and charges (optional) your phone so effortlessly, it feels like magic. Attach your phone in portrait or landscape, and remove it instantly with the press of a button‚ even with riding gloves on. A rigid adjustment arm lets you customize your phone position and viewing angle. Best-in-class vibration isolator prevents phone damage, yet preserves enough stiffness so you can easily interact with your phone while mounted. Weatherproof machined and anodized aluminum construction with stainless steel fasteners. Requires a Peak Design Case or Universal Adapter (sold separately). Qi2 charging version comes with a waterproof USB-C cable that requires a USB-C power source. USB-A and SAE (direct-to-battery) cables sold separately. Don't have clip-on style bars? Get the Motorcycle Bar Mount.
Compare
Quick view
Add to wishlist

Peak Design – Universal Bar Mount

,
RM269.00
Add to cart
Designed for a wide variety of mounting setups, the Universal Bar Mount securely holds your phone on the handlebars, stem, or frame of any bike, scooter, stroller, golf cart, and more. Silicone band attaches snugly to wide range of standard bar diameters and can be repositioned easily. Features an ultra-strong magnetic/mechanical mounting technology (called SlimLink) that grabs and locks your phone so effortlessly, it feels like magic. Remove your phone instantly with the push of a button. Easily switch between portrait and landscape alignment without removing your phone. The mounting head clocks in 32 discreet positions so you can position your phone level on any handlebar style. Quickly move this mount from one place to another, or remove it at the end of your ride in places where theft is a concern. Requires a Peak Design Case or Universal Adapter (sold separately).