Click to enlarge
Peak Design - Motorcycle Bar Mount RM529.00
Back to products
Peak Design - Car Vent Mount RM349.00 – RM529.00

Peak Design – Car VHB Mount

RM249.00 – RM429.00

A phone mount that is so beautiful, secure, and intuitive, that once you install it in your car, you’ll feel like it was there from the start. That’s because unlike flimsy, bulky plastic car mounts that stick out like sore thumbs, the Peak Design Car Mount is made from a beautiful machined/anodized aluminum and mounts directly to your dash or console via an ultra-durable 3M VHB pad. Ultra-strong MagSafe-compatible magnets hold your phone in place even during the most spirited driving‚ we call the mounting system SlimLink and it’s so fast and secure, it borders on magic. Adjust viewing angle with a buttery-smooth aluminum ballhead. Car Mount’s small footprint lets you mount your phone right where you want it without obstructing your view of the road.

Available in standard or wireless charging models. With the charging model, the mount’s magnetic connection system ensures perfect charging coil alignment every time. That means more consistent and efficient charging, and no more surprise battery outages.

View our Vent Mount for additional mounting options. Requires a Peak Design Case or Universal Adapter (sold separately). Also works with MagSafe phones and phone cases. Charging may not be possible or optimal when using the Universal Adapter. Best results when attached to flat, hard, non-porous, non-textured surfaces.

Clear
Compare
Add to wishlist
SKU: N/A Categories: ,
Description

Specs

Dimensions

  • Charging:

    • Mount Head: 5.8cm x 5.8cm x 1.2cm (2.3″ x 2.3″ x 0.5″)
    • Total Height (from dashboard): 4.5cm (varies depending on ballhead position)
    • Base Pad: 3cm x 5cm (1.9″ x 2.0″)

  • Non-Charging:

    • Mount Head: 5.5cm x 5.5cm x 0.7cm (2.2″ x 2.2″ x 0.3″)
    • Total Height (from dashboard): 3.7cm (varies depending on ballhead position)
    • Base Pad: 3cm x 5cm (1.9″ x 2.0″)

Weight

  • Charging:

    • 95.4g (3.4oz)
      Including charging hardware: 133.5g (4.7oz)

  • Non-Charging:

    • 58g (2.05oz)

Adhesive Removal

  • Can be safely removed without damaging surfaces or leaving residue in most instances
  • Hold dental floss between adhesive pad and dash, and pull floss in a sawing motion to break the adhesive bond
  • If there is remaining residue, roll it off with your finger or remove with blue painter’s tape
  • Includes a 2nd adhesive pad for remounting/repositioning

 

 

Materials & Sustainability

  • Materials (both models)
  • Machined/anodized aluminum mounting head & stem
  • Grippy silicone mounting pad with Tinuvin 770 UV-stabilizer
  • High-temp neodymium mounting magnets

 

 

Design Features

Features Overview

Meet the Peak Design Car Mount. A phone mount that is so beautiful, secure, and intuitive, that once you install it in your car, you’ll feel like it was there since your car rolled off the production line. That’s because unlike flimsy, bulky plastic car mounts that stick out like sore thumbs, the Peak Design Car Mount is made from a beautiful machined/anodized aluminum and mounts directly to your dash or console via an ultra-durable 3M VHB pad. Ultra-strong MagSafe-compatible magnets hold your phone in place even during the most spirited driving‚ we call the mounting system SlimLink and it’s so fast and secure, it borders on magic.

 

Meet Slimlink™

At the heart of the Car Mount is Peak Design’s revolutionary SlimLink™ magnetic attachment system. This built-in technology provides an ultra-secure connection that holds your phone firmly in place, even during the bumpiest of rides. The system is compatible with both Peak Design Cases and MagSafe® phones and cases, allowing for effortless attachment and detachment with just one hand. The instant, reliable connection feels almost magical, making it a joy to use every time you get in the car.

 

Adjustable Ball Head

Peak Design’s Car Mount offers ultra-smooth, stable viewing angle adjustment, allowing you to position your phone exactly where you need it. The mount features a wide range of articulation, with a ball head designed by Peak Design’s tripod engineers, enabling precise control and easy switching between portrait and landscape modes. This flexibility ensures that your phone is always visible and accessible without obstructing your view, making for a safer and more convenient driving experience.

 

Endless Mounting Locations

The Peak Design Car Mount provides endless mounting possibilities within your vehicle. It installs with ultra-strong, weatherproof 3M VHB adhesive, making it compatible with a variety of smooth, flat surfaces on your dashboard or console. While best suited for smooth surfaces, it can be safely removed without leaving damage or residue, thanks to the included extra adhesive pad for repositioning. With its ability to mount securely without blocking your field of view, the Car Mount offers a flexible, clutter-free way to keep your phone in the perfect spot.

 

Gorgeous Minimal Design

Designed to complement your vehicle’s interior, the Car Mount has a low-profile, aesthetically clean look that feels like a natural part of your dashboard. Its sleek form factor and refined details ensure that it blends seamlessly into your car, avoiding the cheap and bulky appearance of traditional mounts. The mount’s understated elegance, paired with its premium materials, makes it a stylish yet functional accessory that elevates your in-car experience.

 

Built to Last

Crafted from beautiful machined and anodized aluminum, the Car Mount is designed to endure the test of time. It’s made with premium materials and robust construction, ensuring it remains reliable through multiple phones and years of use. Like all Peak Design products, this mount is guaranteed for life, reflecting the brand’s commitment to exceptional quality and durability. Whether you’re using it with your first Peak Design setup or your fifth, it will keep delivering peak performance.

 

 

What’s In The Box

  • Car Mount x1
  • Extra Adhesive Pad x1
Additional information
Type

Charging, Non-Charging
Shipping & Delivery

Related products

Compare
Quick view
Add to wishlist

Peak Design – Shoe Pouch

,
RM159.00
Select options
Strong, ultralight, and ultra-packable, Shoe Pouch (now in 3 colors) provides dedicated storage for shoes or clothes. Works great with any suitcase or bag, and sized to fit perfectly into Peak Design Travel Bags. Uniquely patterned from a single piece of self-healing 70D nylon, the Shoe Pouch weighs in at a feathery 48g. When you’re not using Shoe Pouch, stow it in the integrated storage pouch. A perfect little bag to have on-hand in case you need more storage or organization mid-trip. The burly #5 UltraZip on the main opening can withstand decades of use thanks to it's proprietary abrasion-resistant thread. Typically fits 1-2 pairs of shoes, depending on size. Fair Trade Certified and 100% carbon neutral. Fabric is solution-dyed for significant reduction in water use, and Raw color way is undyed for even greater water/energy savings. Designed for use in any suitcase or bag, and sized to fit perfectly in any Peak Design Travel Bag. Bundle with our Packing Cubes and save 10%.
Compare
Quick view
Add to wishlist

Peak Design – Slide Lite Camera Strap

,
RM349.00
Select options
The most versatile pro camera strap in the world, Slide Lite packs the functionality of our flagship Slide strap into a smaller package, perfectly suited for mirrorless and light DSLR cameras, yet fully capable of carrying larger cameras as well. Wear Slide Lite as a sling, neck, or shoulder strap. Seatbelt-style nylon webbing has a smooth side that glides over clothing in sling mode and a grippy side that prevents slipping in shoulder mode. Dual quick-adjusters provide instant access and easy reconfiguration. Unique Anchor Link system connects quickly and dual points of connection keep your camera more stable than traditional sling straps. Each Anchor holds over 200lbs (90kg), strong enough to keep the heaviest of pro rigs safe. As of 2018, Slide Lite features an improved silicone grip, upgraded webbing, and lower profile strap/hardware transitions. Anchor connectors have been updated to be smaller, faster, and more secure. For more comfortable carry, check out Slide.
Compare
Quick view
Add to wishlist

Peak Design – Everyday Case for iPhone 12 Series

,
RM199.00 – RM249.00
Select options
A Magsafe-compatible phone case with the perfect balance of slimness, smart aesthetics, and protection, plus it brilliantly connects to the entire Peak Design Mobile Ecosystem. It's a case with zero compromise—and you don't have to take our word. The Wirecutter frankly admits "we don't say this often, but there aren't any flaws." Features a slim 2.4mm profile and protective rubberized bumper, all wrapped in beautiful nylon canvas shell. But what truly sets this case apart is the brilliant magnetic/mechanical lock that's built right into it. We call this mounting technology SlimLink™, and it's so fast and secure that it borders on magic. With this case on your phone, you can instantly connect to all Peak Design Mobile mounts, chargers, and accessories. It even works with Apple MagSafe chargers and accessories, however compatibility with all 3rd party chargers is not guaranteed.
Compare
Quick view
Add to wishlist

Peak Design – Car Vent Mount

,
RM349.00 – RM529.00
Select options
You get what you pay for with car vent mounts, and the Peak Design Car Vent Mount is hands-down the strongest, sturdiest, most adjustable vent mount money can buy. Traditional vent mounts are fraught with frustration: they're flimsy and prone to falling off, they're difficult to position, and they completely block airflow. Built from solid machined aluminum, the PD Car Vent Mount fastens to your vent with 2 points of connection for considerably more strength and stability. A 360-degree swivel arm lets you position your phone away from your vent for better airflow and easier viewing. And to top it off, this mount uses our SlimLink™ mounting system—powerful magnets and a UV-shielded anti-slip pad instantly grab hold of your phone in portrait or landscape. Adjust the viewing angle with a buttery-smooth aluminum ball head. This mount is strong enough for any kind of driving, off-road included. Available in standard or wireless charging models. With the charging model, the mount's magnetic connection system ensures perfect charging coil alignment every time. That means more consistent and efficient charging and no more surprise battery outages. Compatible with many but not all car vents (see compatibility specifications below). Requires a Peak Design Case or Universal Adapter (sold separately). Also works with MagSafe phones and phone cases. Charging may not be possible or optimal when using the Universal Adapter.
Compare
Quick view
Add to wishlist

Peak Design – Motorcycle Bar Mount

,
RM529.00
Add to cart
A versatile, bomb-proof motorcycle phone mount that is beautiful, durable, adjustable, and delightfully easy to use—and features optional Qi2 wireless charging. Stop hassling with mounting systems that are bulky, fidgety, and unsightly. Securely installs on a wide variety of handlebars (from 7/8" to 1.25" diameter). Features an ultra-strong magnetic/mechanical mounting technology (called SlimLink™) that grabs, locks, and charges (optional) your phone so effortlessly, it feels like magic. Remove your phone instantly with the press of a button—even with riding gloves on. A rigid adjustment arm with fully articulating ball head lets you customize your phone position for optimized viewing. Remove the arm for lower-profile mounting. Best-in-class vibration isolator prevents phone damage, yet preserves enough stiffness so you can easily interact with your phone while mounted. Weatherproof machined and anodized aluminum construction with stainless steel fasteners. V2 improvements include a fully-adjustable ball head, enhanced aesthetics, and optional Qi2 wireless charging. Requires a Peak Design Case or Universal Adapter (sold separately). Qi2 charging version comes with a waterproof USB-C cable that requires a USB-C power source. USB-A and SAE (direct-to-battery) cables sold separately.
Compare
Quick view
Add to wishlist

Peak Design – Motorcycle Stem Mount

,
RM529.00
Add to cart
Ideal for sport and street bikes with clip-on style handlebars, the low-profile Motorcycle Stem Mount‚ now with optional Qi2 wireless charging‚ keeps your phone rigidly mounted, easily viewable, and instantly accessible. Securely installs in most hollow-center steering stem nuts using an expansion plug. Features an ultra-strong magnetic/mechanical mounting technology (called SlimLink) that grabs, locks, and charges (optional) your phone so effortlessly, it feels like magic. Attach your phone in portrait or landscape, and remove it instantly with the press of a button‚ even with riding gloves on. A rigid adjustment arm lets you customize your phone position and viewing angle. Best-in-class vibration isolator prevents phone damage, yet preserves enough stiffness so you can easily interact with your phone while mounted. Weatherproof machined and anodized aluminum construction with stainless steel fasteners. Requires a Peak Design Case or Universal Adapter (sold separately). Qi2 charging version comes with a waterproof USB-C cable that requires a USB-C power source. USB-A and SAE (direct-to-battery) cables sold separately. Don't have clip-on style bars? Get the Motorcycle Bar Mount.
Compare
Quick view
Add to wishlist

Peak Design – Universal Bar Mount

,
RM269.00
Add to cart
Designed for a wide variety of mounting setups, the Universal Bar Mount securely holds your phone on the handlebars, stem, or frame of any bike, scooter, stroller, golf cart, and more. Silicone band attaches snugly to wide range of standard bar diameters and can be repositioned easily. Features an ultra-strong magnetic/mechanical mounting technology (called SlimLink) that grabs and locks your phone so effortlessly, it feels like magic. Remove your phone instantly with the push of a button. Easily switch between portrait and landscape alignment without removing your phone. The mounting head clocks in 32 discreet positions so you can position your phone level on any handlebar style. Quickly move this mount from one place to another, or remove it at the end of your ride in places where theft is a concern. Requires a Peak Design Case or Universal Adapter (sold separately).
Compare
Quick view
Add to wishlist

Peak Design – Wall Mount

,
RM139.00
Select options
Instantly and securely mount your phone to any wall, mirror, tile, or flat surface with the beautiful nylon canvas wrapped Wall Mount. Recipes in the kitchen, podcasts in the bathroom, video calls from the workshop...the potential for added utility with your phone at home is endless. Safely installs to a wide variety of walls with 3M E-series adhesive. Ultra-strong magnets grab your phone with a satisfying 'pop' and hold it in portrait or landscape mode. The unique mounting system is called SlimLink and it's so fast and secure, it borders on magic. Low-profile and aesthetically handsome, Wall Mount comes in light and dark color-ways to compliment any space in your home. Requires a Peak Design Case or Universal Adapter (sold separately). Also works with MagSafe phones and phone cases. Best results when attached to flat, hard, non-porous, non-textured surfaces.