Click to enlarge
Peak Design - Out Front Bike Mount RM379.00
Back to products
Peak Design - Motorcycle Stem Mount RM529.00

Peak Design – Car Vent Mount

RM349.00 – RM529.00

You get what you pay for with car vent mounts, and the Peak Design Car Vent Mount is hands-down the strongest, sturdiest, most adjustable vent mount money can buy. Traditional vent mounts are fraught with frustration: they’re flimsy and prone to falling off, they’re difficult to position, and they completely block airflow. Built from solid machined aluminum, the PD Car Vent Mount fastens to your vent with 2 points of connection for considerably more strength and stability. A 360-degree swivel arm lets you position your phone away from your vent for better airflow and easier viewing. And to top it off, this mount uses our SlimLink™ mounting system—powerful magnets and a UV-shielded anti-slip pad instantly grab hold of your phone in portrait or landscape. Adjust the viewing angle with a buttery-smooth aluminum ball head. This mount is strong enough for any kind of driving, off-road included.

Available in standard or wireless charging models. With the charging model, the mount’s magnetic connection system ensures perfect charging coil alignment every time. That means more consistent and efficient charging and no more surprise battery outages.

Compatible with many but not all car vents (see compatibility specifications below). Requires a Peak Design Case or Universal Adapter (sold separately). Also works with MagSafe phones and phone cases. Charging may not be possible or optimal when using the Universal Adapter.

Clear
Compare
Add to wishlist
SKU: N/A Categories: ,
Description

Specs

Dimensions

  • Charging

    • Mount Head: 5.8cm x 5.8cm x 1.2cm (2.3″ x 2.3″ x 0.5″)
      Swivel Arm Length: 6.9cm (5cm pivot to pivot)

  • Non-Charging:

    • Mount Head: 5.5cm x 5.5cm x 0.7cm (2.2″ x 2.2″ x 0.3″)
      Swivel Arm Length: 6.9cm (5cm pivot to pivot)

Weight

  • Charging:

    • 141.4g (4.9oz)
      Including charging hardware: 181.2g (6.4oz)

  • Non-Charging:

    • 99g (3.5oz)

Adhesive Removal

  • Can be safely removed without damaging surfaces or leaving residue in most instances
  • Hold dental floss between adhesive pad and dash, and pull floss in a sawing motion to break the adhesive bond
  • If there is remaining residue, roll it off with your finger or remove with blue painter’s tape
  • Includes a 2nd adhesive pad for remounting/repositioning

Compatibility

  • Straight horizontal or vertical blades
  • Not suitable for curved, circular or irregularly shaped blades
  • Vent must be at least 63mm (2.5″) wide for vertical blades
  • Vent must be at least 63mm (2.5″) tall for horizontal blades
  • Blade depth must be between 7-23mm (1/4″ to 7/8″)
  • Gap between blades must be at least 8mm (5/16”)
  • Blades must be secure and not easily removable

 

 

Materials & Sustainability

  • Machined/anodized aluminum mounting head & swivel arm
  • Grippy silicone mounting pad with Tinuvin 770 UV-stabilizer
  • High-temp neodymium mounting magnets
  • Glass-reinforced nylon blade hook
  • Hardened steel blade clip with silicone overmold
  • ABS plastic knobs

 

 

Design Features

Features Overview

Meet Peak Design’s take on the vent mount. It is utterly solid, but designed with a light touch, so as not to damage your vents. It’s highly adjustable, so your phone can be positioned to not block the airflow from the vent it is attached to. If a vent mounting solution is the right fit for your ride, this is the best vent mount available anywhere.

 

Meet Slimlink™

At the core of Peak Design’s vent mounts is the innovative SlimLink™ magnetic phone attachment technology. This system provides an ultra-secure connection that’s strong enough for off-road driving and feels almost magical in its ease of use. The unique clamp connector delivers exceptional stability, preventing your phone from wobbling or shifting, even on rough terrain. Combined with a buttery-smooth ball head—engineered by Peak Design’s tripod experts—the mount offers precise adjustments for the perfect viewing angle, making it ideal for both everyday commutes and rugged adventures.

 

Maintain Airflow

Unlike traditional vent mounts that can obstruct airflow, Peak Design’s mounts are specifically engineered to maintain the functionality of your vehicle’s heating and cooling system. The clever design of the 360-degree swivel arm and compact form factor ensures that your phone is securely held without blocking air circulation. This thoughtful approach makes it possible to enjoy the convenience of hands-free viewing while keeping your vehicle’s interior climate comfortable. Whether holding your phone in portrait or landscape mode, the mount offers versatile positioning that doesn’t interfere with vent performance.

 

Built To Last

Constructed with rugged, machined, and anodized aluminum, Peak Design’s vent mounts are designed for durability and longevity. The robust build quality ensures reliable performance, while the high-quality materials resist wear and tear, making it a long-term solution for securely holding your phone. Easy to install and remove, the vent mounts can be quickly transferred between vehicles, offering flexibility for users who need a dependable mounting solution across different settings. The addition of wireless charging capabilities in the Qi2 model further enhances its functionality, providing up to 15W of power for compatible devices with minimal heat generation.

 

 

What’s In The Box

  • Charging Car Vent Mount x1
  • 1m Charging Cable (USB-C to USB-C) x1
  • Cigarette Lighter Power Adapter x1
  • Charging Cable Routing Clips x3
Additional information
Type

Charging, Non-Charging
Shipping & Delivery

Related products

Compare
Quick view
Add to wishlist

Peak Design – Clutch Camera Strap

,
RM259.00
Add to cart
The world’s first camera hand strap that is quick-connecting and quick-adjusting. Clutch gives you access to your camera’s controls but quickly cinches down when you need security. Hypalon exterior, microfiber pad, and aluminum adjuster hardware is ultra-durable and inspired by high-end climbing gear. Attaches to your camera at 2 points: your camera strap mount (via a reinforced Hypalon loop) and your camera tripod mount (via our low-profile Arca-compatible Standard Plate). Clutch can be used alongside other Peak Design straps, as well as the Capture Camera Clip. Still not sure what strap you need? See our comparison guide.
Compare
Quick view
Add to wishlist

Peak Design – Slide Camera Strap

,
RM399.00
Select options
The original Peak Design flagship camera strap, Slide is everything other pro camera straps aren't: beautiful, low-profile, adjustable, quick-connecting, and configurable to your gear. Wear Slide as a sling, neck, or shoulder strap. Internally-padded nylon webbing has a smooth side that glides over clothing in sling mode and a grippy side that prevents slipping in shoulder mode. Dual quick-adjusters provide instant access and easy reconfiguration. The unique Anchor Link system connects quickly and dual points of connection keep your camera more stable than traditional sling straps. Each Anchor holds over 200lbs (90kg), strong enough to keep the heaviest of pro rigs safe. As of 2018, Slide features an improved silicone grip, upgraded webbing, and lower profile strap/hardware transitions. Anchor connectors have been updated to be smaller, faster, and more secure. For mirrorless carry, check out Slide Lite.
Compare
Quick view
Add to wishlist

Peak Design – Micro Clutch

,
RM359.00
Select options
The first of its kind, Micro Clutch is a hand strap specifically designed for small mirrorless camera bodies. Micro Clutch is perfectly suited for any activity where drop protection and comfort are of the essence, whether it's run-and-gun street photography, actively shooting in the outdoors, or doing an extended portrait session in the studio. Unlike traditional DSLR hand straps which press your palm against your camera body, Micro Clutch's padded Hypalon loop comfortably cradles 2-4 fingers. This unique design gives you a delightful combination of superior grip and enhanced comfort, and does so without restricting your access to your camera's front, rear, and top controls. A beautiful low-profile machined aluminum baseplate conceals a hidden attachment tool, making battery access a breeze. Micro Clutch also includes a removable tripod plate for use with Capture V3, PD tripods, and 3rd party Arca-compatible tripods. A built-in Anchor attachment point allows use with any PD camera strap. Fits a wide range of mirrorless camera bodies. Choose the L-plate model for mirrorless cameras with a pronounced hand grip, and the I-plate model for cameras with little or no hand grip.
Compare
Quick view
Add to wishlist

Peak Design – Everyday Case for iPhone 14 Series

,
RM199.00 – RM249.00
Select options
A Magsafe-compatible phone case with the perfect balance of slimness, smart aesthetics, and protection, plus it brilliantly connects to the entire Peak Design Mobile Ecosystem. It's a case with zero compromise—and you don't have to take our word. The Wirecutter frankly admits "we don't say this often, but there aren't any flaws." Features a slim 2.4mm profile and protective rubberized bumper, all wrapped in beautiful nylon canvas shell. But what truly sets this case apart is the brilliant magnetic/mechanical lock that's built right into it. We call this mounting technology SlimLink™, and it's so fast and secure that it borders on magic. With this case on your phone, you can instantly connect to all Peak Design Mobile mounts, chargers, and accessories. It even works with Apple MagSafe chargers and accessories, however compatibility with all 3rd party chargers is not guaranteed.
Compare
Quick view
Add to wishlist

Peak Design – Everyday Case for Iphone 15 Series

,
RM249.00 – RM299.00
Select options
A Magsafe-compatible phone case with the perfect balance of slimness, smart aesthetics, and protection, plus it brilliantly connects to the entire Peak Design Mobile Ecosystem. It's a case with zero compromise—and you don't have to take our word. The Wirecutter frankly admits "we don't say this often, but there aren't any flaws." Features a slim 2.4mm profile and protective rubberized bumper, all wrapped in beautiful nylon canvas shell. But what truly sets this case apart is the brilliant magnetic/mechanical lock that's built right into it. We call this mounting technology SlimLink™, and it's so fast and secure that it borders on magic. With this case on your phone, you can instantly connect to all Peak Design Mobile mounts, chargers, and accessories. It even works with Apple MagSafe chargers and accessories, however compatibility with all 3rd party chargers is not guaranteed.
Compare
Quick view
Add to wishlist

Peak Design – Ball Mount Adapter

,
RM269.00 – RM459.00
Select options
Ideal for motorcycles, cars, trucks, ATVs, overlanding vehicles, boats, planes, and wheelchairs, these adapters let you upgrade your 3rd party phone mount with Peak Design's strong, low-profile, easy-to-use SlimLink™ connection system. It works with a variety of modular 3rd party phone mounting systems—specifically ones that utilize either 1" or 20mm diameter ball-and-socket joints. These 3rd party systems enable an almost infinite range of mounting phone configurations. The Peak Design Ball Mount Adapters upgrade your system with brilliantly fast and secure mounting action for your phone. They also feature weatherproof machined and anodized aluminum construction, ideal for the Locking Ball Mount and all of the outdoor adventures you will go on. Choose from 2 mount styles, locking or charging. Locking mounts are more secure, featuring push-button phone release, and are suited for outdoor use (motorcycles, dirtbikes, ATVs, boats). Locking mounts feature a best-in-class vibration isolator to prevent phone damage. Charging mounts hold your phone magnetically and provide instant wireless charging. They're suitable for any vehicle with a closed cabin (cars, trucks, planes) and can still handle the gnarliest off-road trails. Charging mounts are also MagSafe compatible. Requires a 3rd party phone mount that utilizes 1" (like RAM) or 20mm (like Offroam, Tackform, 67 Designs) ball-and-socket connection joints (sold separately). Locking mounts require a Peak Design Case or Universal Adapter (sold separately).
Compare
Quick view
Add to wishlist

Peak Design – Universal Adapter

,
RM169.00
Add to cart
Install this adhesive-backed adapter on the back of a 3rd party phone case to make nearly any phone compatible with Peak Design Mobile mounts and accessories. At just 2.5mm thick and wrapped in a beautiful weatherproof nylon canvas, the Universal Adapter is low-profile, aesthetically clean, and adheres with 3M VHB for an ultra-strong, ultra-durable connection. Like the Peak Design Everyday Case, the Universal Adapter has a brilliant magnetic/mechanical lock built right into it. We call this mounting technology SlimLink, and it's so fast and secure that it borders on magic. With this adapter on your 3rd party phone case, you can instantly connect to all Peak Design Mobile mounts and accessories. It even works with Apple MagSafe accessories, too. Adheres to smooth, non-textured, non-porous case materials like hard plastic and metal. Not recommended for soft or rubbery surfaces like silicone or leather. Installing directly on your phone is not recommended. Wireless charging may not be possible or optimal with adapter installed. This adapter contains magnets that may interfere with stylus accessories like the Samsung S-Pen. Not designed for tablets or folding/flip phones.
Compare
Quick view
Add to wishlist

Peak Design – Wall Mount

,
RM139.00
Select options
Instantly and securely mount your phone to any wall, mirror, tile, or flat surface with the beautiful nylon canvas wrapped Wall Mount. Recipes in the kitchen, podcasts in the bathroom, video calls from the workshop...the potential for added utility with your phone at home is endless. Safely installs to a wide variety of walls with 3M E-series adhesive. Ultra-strong magnets grab your phone with a satisfying 'pop' and hold it in portrait or landscape mode. The unique mounting system is called SlimLink and it's so fast and secure, it borders on magic. Low-profile and aesthetically handsome, Wall Mount comes in light and dark color-ways to compliment any space in your home. Requires a Peak Design Case or Universal Adapter (sold separately). Also works with MagSafe phones and phone cases. Best results when attached to flat, hard, non-porous, non-textured surfaces.