| Color |
Black, Silver |
|---|
Peak Design – Bolt Pack
RM69.00
Bolt Pack contains 2 replacement sets of clamping bolts for Capture: one pair of thumb-drive bolts which clamp to any strap up to 1.5 cm thick and one pair of hex-drive bolts which clamp to any strap up to 1.6 cm thick.
Additional information
Shipping & Delivery
Related products
Peak Design – Clutch Camera Strap
RM259.00
The world’s first camera hand strap that is quick-connecting and quick-adjusting. Clutch gives you access to your camera’s controls but quickly cinches down when you need security. Hypalon exterior, microfiber pad, and aluminum adjuster hardware is ultra-durable and inspired by high-end climbing gear. Attaches to your camera at 2 points: your camera strap mount (via a reinforced Hypalon loop) and your camera tripod mount (via our low-profile Arca-compatible Standard Plate). Clutch can be used alongside other Peak Design straps, as well as the Capture Camera Clip.
Still not sure what strap you need? See our comparison guide.
Peak Design – Slide Camera Strap
RM399.00
The original Peak Design flagship camera strap, Slide is everything other pro camera straps aren't: beautiful, low-profile, adjustable, quick-connecting, and configurable to your gear. Wear Slide as a sling, neck, or shoulder strap. Internally-padded nylon webbing has a smooth side that glides over clothing in sling mode and a grippy side that prevents slipping in shoulder mode. Dual quick-adjusters provide instant access and easy reconfiguration. The unique Anchor Link system connects quickly and dual points of connection keep your camera more stable than traditional sling straps. Each Anchor holds over 200lbs (90kg), strong enough to keep the heaviest of pro rigs safe. As of 2018, Slide features an improved silicone grip, upgraded webbing, and lower profile strap/hardware transitions. Anchor connectors have been updated to be smaller, faster, and more secure.
For mirrorless carry, check out Slide Lite.
Peak Design – Everyday Case for iPhone 12 Series
RM199.00 – RM249.00
A Magsafe-compatible phone case with the perfect balance of slimness, smart aesthetics, and protection, plus it brilliantly connects to the entire Peak Design Mobile Ecosystem. It's a case with zero compromise—and you don't have to take our word. The Wirecutter frankly admits "we don't say this often, but there aren't any flaws."
Features a slim 2.4mm profile and protective rubberized bumper, all wrapped in beautiful nylon canvas shell. But what truly sets this case apart is the brilliant magnetic/mechanical lock that's built right into it. We call this mounting technology SlimLink™, and it's so fast and secure that it borders on magic. With this case on your phone, you can instantly connect to all Peak Design Mobile mounts, chargers, and accessories. It even works with Apple MagSafe chargers and accessories, however compatibility with all 3rd party chargers is not guaranteed.
Peak Design – Everyday Case for iPhone 13 Series
RM199.00 – RM249.00
A Magsafe-compatible phone case with the perfect balance of slimness, smart aesthetics, and protection, plus it brilliantly connects to the entire Peak Design Mobile Ecosystem. It's a case with zero compromise—and you don't have to take our word. The Wirecutter frankly admits "we don't say this often, but there aren't any flaws."
Features a slim 2.4mm profile and protective rubberized bumper, all wrapped in beautiful nylon canvas shell. But what truly sets this case apart is the brilliant magnetic/mechanical lock that's built right into it. We call this mounting technology SlimLink™, and it's so fast and secure that it borders on magic. With this case on your phone, you can instantly connect to all Peak Design Mobile mounts, chargers, and accessories. It even works with Apple MagSafe chargers and accessories, however compatibility with all 3rd party chargers is not guaranteed.
Peak Design – Everyday Case for Iphone 15 Series
RM249.00 – RM299.00
A Magsafe-compatible phone case with the perfect balance of slimness, smart aesthetics, and protection, plus it brilliantly connects to the entire Peak Design Mobile Ecosystem. It's a case with zero compromise—and you don't have to take our word. The Wirecutter frankly admits "we don't say this often, but there aren't any flaws."
Features a slim 2.4mm profile and protective rubberized bumper, all wrapped in beautiful nylon canvas shell. But what truly sets this case apart is the brilliant magnetic/mechanical lock that's built right into it. We call this mounting technology SlimLink™, and it's so fast and secure that it borders on magic. With this case on your phone, you can instantly connect to all Peak Design Mobile mounts, chargers, and accessories. It even works with Apple MagSafe chargers and accessories, however compatibility with all 3rd party chargers is not guaranteed.
Peak Design – Car VHB Mount
RM249.00 – RM429.00
A phone mount that is so beautiful, secure, and intuitive, that once you install it in your car, you'll feel like it was there from the start. That's because unlike flimsy, bulky plastic car mounts that stick out like sore thumbs, the Peak Design Car Mount is made from a beautiful machined/anodized aluminum and mounts directly to your dash or console via an ultra-durable 3M VHB pad. Ultra-strong MagSafe-compatible magnets hold your phone in place even during the most spirited driving‚ we call the mounting system SlimLink and it's so fast and secure, it borders on magic. Adjust viewing angle with a buttery-smooth aluminum ballhead. Car Mount's small footprint lets you mount your phone right where you want it without obstructing your view of the road.
Available in standard or wireless charging models. With the charging model, the mount's magnetic connection system ensures perfect charging coil alignment every time. That means more consistent and efficient charging, and no more surprise battery outages.
View our Vent Mount for additional mounting options. Requires a Peak Design Case or Universal Adapter (sold separately). Also works with MagSafe phones and phone cases. Charging may not be possible or optimal when using the Universal Adapter. Best results when attached to flat, hard, non-porous, non-textured surfaces.
Peak Design – Wall Mount
RM139.00
Instantly and securely mount your phone to any wall, mirror, tile, or flat surface with the beautiful nylon canvas wrapped Wall Mount. Recipes in the kitchen, podcasts in the bathroom, video calls from the workshop...the potential for added utility with your phone at home is endless. Safely installs to a wide variety of walls with 3M E-series adhesive. Ultra-strong magnets grab your phone with a satisfying 'pop' and hold it in portrait or landscape mode. The unique mounting system is called SlimLink and it's so fast and secure, it borders on magic. Low-profile and aesthetically handsome, Wall Mount comes in light and dark color-ways to compliment any space in your home.
Requires a Peak Design Case or Universal Adapter (sold separately). Also works with MagSafe phones and phone cases. Best results when attached to flat, hard, non-porous, non-textured surfaces.
Peak Design – Wireless Charging Stand
RM429.00
Part desktop sculpture, part charging phone stand, our Wireless Charging Stand is made out of precision-machined anodized aluminum and adjusts with an ultra-smooth friction hinge to find your optimal viewing angle. Magnetically grabs your phone with a satisfying 'pop' and holds it in portrait or landscape mode. The magnets, charging components, and chassis are each custom-designed to optimize charging alignment, charging speed, and heat dissipation. This unique mounting system is called SlimLink™‚ and it's so fast and secure, it borders on magic. A grippy silicone base and solid aluminum build allows for 1-handed phone removal‚ the stand stays put, unlike with other magnetic chargers. Hinged construction lets you infinitely adjust viewing angle, and also fold the stand flat for easy transport. Elegant, functional, and beautiful, it's the charging stand that your desk or bedside table deserves.
Requires a Peak Design Case, Universal Adapter, MagSafe phone or MagSafe Phone Case.
Requires a USB-C power adapter that can supply 20W/12V output.
Charging may not be possible or optimal when using the Peak Design Universal Adapter.